電抗器水路工作水壓為1-10Bar，水路穩定可靠。
The water circuit and electricity is separated, which makes the reactor maintenance
convenient, safe and reliable. Reactor can be work under the condition of strick
protection requirement, poor cooling condition, have low temperature rise. Core with
grain-oriented cold-rolled silicon steel sheets, bringing reactors high reliability, small
size, light weight and cost effective. Reactor water circuit work pressure is 1-10 bar,
stable and reliable
產品分類
1. 水電分離（板式水冷電抗器）：
(Product Classification)
水冷散熱板安置在板式水冷電抗器電抗器線包中，電抗器產生的熱量通過散熱板導熱后由水介質將熱量導出，以達到降低溫升的目的。電抗
器水電分離，無漏電流產生。本公司生產水冷電抗器電流500-1500A，電感量0.01-0.5mH,廣泛使用在風力發電，變頻器等電力設備中。
繞組采用空心銅管制造，銅損耗產生的熱量通過銅管內的導熱介質（純凈水或混合液）將熱量導出導熱介質與發熱導體之間熱接觸良好，導
熱系數高，繞組可承受較大電流。本公司生產水冷電抗器電流1-10KA，電感量0.1-2.0mH.廣泛應用在冶煉，感應加熱等工業設備上。
Tubular Water-cooling Reactor
The winding is made of hollow copper pipe, in which is heat-conducting medium that derives the heat generated by copper loss. The
heat-conducting medium and heating element have so good contacts that the heat-conductive coefficient is high and the winding can bare
large current. Our 1-10KA 0.1-2.0mH water-cooling reactors are widely used in industrial devices such as induction heating and metallurgy.
Plate Water-cooling Reactor
Water-cooling heat sink is put between reactor wire packages to control temperature rise. The water and electricity is separated perfectly to
avoid the electric leakage. Our 500-1500A 0.01-0.5mH water-cooling reactors are widely used in electrical unit such as wind power
generation device and inverter.
2. 水電一體（管式水冷電抗器）：
繞組采用空心銅管制造，銅損耗產生的熱量通過銅管內的導熱介質（純凈水或混合液）將熱量導出導熱介質與發熱導體之間熱接觸良好，導
熱系數高，繞組可承受較大電流。本公司生產水冷電抗器電流1-10KA，電感量0.1-2.0mH.廣泛應用在冶煉，感應加熱等工業設備上。
Tubular Water-cooling Reactor
The winding is made of hollow copper pipe, in which is heat-conducting medium that derives the heat generated by copper loss. The
heat-conducting medium and heating element have so good contacts that the heat-conductive coefficient is high and the winding can bare
large current. Our 1-10KA 0.1-2.0mH water-cooling reactors are widely used in industrial devices such as induction heating and metallurgy
